Flexibility at its best

First and only plug-and-play meter on the market
The Kamstrup MULTICAL® 603 heat meter comes with a built-in Auto Detect function, making it possible to replace the ULTRAFLOW® when needed, without having to manually re-configure the calculator. This increases flexibility and allows you to keep only one type of calculator in stock that can then be used for all Kamstrup ultrasonic flow meters.

Auto Detect is compatible with fourth generation ULTRAFLOW®, which has been produced since 2008. 

Remote re-configuration
Imagine that utilities’ heat meters can be configured with new settings adjusted to the current needs – without logistical challenges and direct access to the meters and without legal registers, meter readings or network control being affected.

Imagine, that the meter’s log can be read in order for abnormal consumption patterns to be investigated – without having to disturb the customer unnecessarily.

With the built-in 2-way communication in the MULTICAL® 603 and a READy remote meter reading system, it is now possible to perform remote configuration of the meters and reading of the log without direct access to the installation.

Discover the possibilities within flexible and easy remote configuration of heat meters – for less hassle for both the utility and the consumer.

Quality of data from your meters

The Kamstrup MULTICAL® 603 is built to last and, above all, designed to perform. When you install an ultrasonic, intelligent meter from Kamstrup you have made a choice. You do not compromise on quality and you want to ensure correct billing and accurate data to form the basis for your network optimation.

New possibilities for remote configuration

Imagine that utilities’ heat meters can be configured with new settings adjusted to the current needs – without logistical challenges and direct access to the meters and without legal registers, meter readings or network control being affected.

Imagine, that the meter’s log can be read in order for abnormal consumption patterns to be investigated – without having to disturb the customer unnecessarily.

With the new built-in 2-way communication in MULTICAL® 603 and a READy remote reading system, it is now possible to perform remote configuration of the meters and reading of the log directly from outside the house, without direct access to the installation.

Discover the possibilities within flexible and easy remote configuration of heat meters – for less hassle for both the utility and the consumer. 

From assumption to knowledge

Ry Heat Utility, Denmark

Along with the town’s rapid development – which included several new neighbourhoods – Ry Heat Utility was in need of detailed knowledge about the pressure in its distribution network. With Kamstrup’s pressure sensors, the utility now gets precise data to use when sizing and renovating its pipes.

Automatic leak protection

Thisted Heat Utility, Denmark

Thisted Varmeforsyning follows an ambitious strategy of intelligent energy control, aiming to increase energy efficiency and keep operating costs down. That is why Thisted Varmeforsyning chose to invest in an innovative solution with 5,000 MULTICAL® 601/602 remotely read heat meters in a radio network.

Let’s get the conversation started

How can we help you today?

I need

I want to

I wish to

1 2 3 4 5 6