Imagine that your heat meter can be easily and remotely configured with settings adjusted to specific needs –– without legal registers, meter readings, or network control being affected.
Imagine that a meter’s log can be read for abnormal consumption patterns and investigated –– without having to disturb the customer unnecessarily.
With linkIQ® or wireless M-Bus communication in MULTICAL® 403 and a READy remote meter reading system, it is now possible to perform remote configuration and read the log without direct access to the installation. Discover the possibilities of flexible, remotely configured heat meters.
Now, you only need to keep one type of heat meter in stock. With the Kamstrup MULTICAL® 403 everything from inlet/outlet position and energy units to target dates and more can be configured individually via the meter’s front panel directly at the installation site.
This allows you to keep a low stock and save resources previously spent on planning.
Versatile communication options
MULTICAL® 403 can be fitted with a selection of advanced communication modules. Kamstrup offers modules with Modbus, BACnet, M-bus, wireless M-bus, and analogue outputs. By combining the meter’s very fast integration time and the modules’ optimized power consumption, you gain access to updated and very frequent meter data. By using M-Bus, the meter can sustain a battery lifetime of up to 16 years –– with meter readings taken from the module every 10 seconds.
You can upgrade through separate software updates for the meter and module respectively as new possibilities and challenges occur without interfering with legal registers.