Future proof cooling and heat meter before, during and after installation

Auto Detect: Auto detection of Kamstrup ultrasonic flow meters

Temperature range: Calculator temp. θ: 2…180 °C Water temp. ΔΘ: 3 K…178 °C

Data logger: Programmable data logger with yearly, monthly, daily or minute values

Software download: Remote updates

A new and flexible member of the family

From now on, all you need is one type of meter in stock.
Depending on the position of the flow sensor in forward or return flow, logger dates and much more the MULTICAL® 603 can be configured individually on site directly via the front buttons on the meter.

This means less need for allocating resources to planning and stock management. 

First and only plug-and-play meter on the market

The MULTICAL® 603 heat and cooling meter comes with a built-in Auto Detect function, making it possible to replace the ULTRAFLOW® when needed, without having to manually re-configure the calculator.

This increases flexibility and allows you to keep only one type of calculator in stock that can then be used for all Kamstrup ultrasonic flow meters.

Auto Detect is compatible with fourth generation ULTRAFLOW®, which has been produced since 2008.

Auto Detect delivers clear benefits when you need to switch the flow part but not the calculator.

It is simple: MULTICAL® 603 is connected to the new flow meter and will automatically detect the flow meter and re-configure accordingly without any need for technical support or special tools. This level of flexibility saves resources, money and unnecessary worries.

New possibilities for remote configuration

Imagine that utilities’ heat meters can be configured with new settings adjusted to the current needs – without logistical challenges and direct access to the meters and without legal registers, meter readings or network control being affected.

Imagine, that the meter’s log can be read in order for abnormal consumption patterns to be investigated – without having to disturb the customer unnecessarily.

With the new built-in 2-way communication in MULTICAL® 603 and a READy remote reading system, it is now possible to perform remote configuration of the meters and reading of the log directly from outside the house, without direct access to the installation.

Discover the possibilities within flexible and easy remote configuration of heat meters – for less hassle for both the utility and the consumer. 

Instant access to data

Forget that you ever needed direct access to read a meter’s data logger. MULTICAL® 603 offers full support for remote reading to speed up billing by removing the need for time-consuming manual readings. You get instant access to the information needed to analyze and optimize your application.

The data logger is programmable to deliver yearly, monthly, daily, hourly and minute values. Just decide which data you need at what intervals. This lets you effectively analyze and diagnose your application for faster identification of load profiles, errors and inconsistencies.

Full flexibility

MULTICAL® 603 can be fitted with two communication modules which in combination with the meter’s integrated M-bus interface allows three communication types. Kamstrup offers modules with Modbus, BACnet, M-bus, wireless M-bus and analogue outputs. By combining the meter’s fast integration time and the modules’ optimized power consumption, you gain access to updated and frequent meter data. By choosing M-Bus, the meter obtains a long battery lifetime with meter readings via the module every 10 seconds.

The flexibility of the MULTICAL® 603 is not limited to its design and the number of integrated modules. It is also possible to configure the data logger to deliver data to match the exact needs in a given situation.

The easy way to remote reading of your thermal energy meters

The popular remote reading system READy is the perfect fit for MULTICAL® 603 heat/cooling meters, which offer full support for remote reading. This gives you quick access to consumption data and the possibility to utilize meter data for analysis and optimizations in your distribution network. 

With a READy network, data from the meters are automatically transferred directly to the utility on a daily or hourly basis. Then, you can easily analyse data in the simple and intuitive PC program, READy Manager.

The collected data can not only be used for accurate billing, but also provide you with increased knowledge about consumption and the possibility of analyzing cooling patterns and much more. READy Manager also gives you access to the tools to transform this knowledge into tangible improvements and energy optimizations. 

User-friendly design

Heat meters and cooling meters are often installed in tight and dark places, where installation is difficult due to lack of lighting and space to maneuver. 

The backlit display is just one of the new design features that make the MULTICAL® 603 not only the most flexible meter on the market but also the most user-friendly heat and cooling meter.

The good news is that it does not compromize the battery lifetime significantly. We still promise long battery life.

In addition, MULTICAL® 603 has ‘back’, ‘forward’ and ‘enter’ navigation keys, making it even easier for the qualified technician and the end user to operate the installed meter.

Technical documentation

Curious about the details?

Follow the link to find
  • Data sheets
  • Manuals
  • Brochures
  • Technical descriptions
  • Approvals
  • User and installation guides

Get in touch

Send us your request, and we will reply to you as soon as possible
Subject *
* Please select a subject
Area of interest *
* Please select one or more areas
* Comments is invalid
* First name is required * First name is invalid
* Last name is required * Last name is invalid
* Email is required * Please enter a valid email
* Company is required * Company is invalid
* Postal code is required * Postal code is invalid
* City is required * City is invalid
* Country is required
* Phone is required * Phone is invalid * Phone is invalid
We use cookies both to ensure our website works properly and to collect statistics about users in order for us to improve the website. You accept the use of cookies by continuing to browse the site or by closing this banner. Read more.